High Cr steel with a low
C content, and corrosion resistance and workability are excellent.
|
Grade |
JIS
Grade |
Chemical
composition (mass %) |
Character
and usage |
C |
Si |
Mn |
P |
S |
Ni |
Cr |
Mo |
N |
Al |
U405 |
SUS405 |
0.08
Max |
1.00
Max |
1.00
Max |
0.040
Max |
0.030
Max |
0.60
Max |
11.50`
14.50 |
- |
- |
0.10`
0.30 |
Not
hardening by cooling from the high temperature.
Turbine, Parts for quenching, Clad metal |
U410L |
SUS410L |
0.030
Max |
1.00
Max |
1.00
Max |
0.040
Max |
0.030
Max |
0.60
Max |
11.00`
13.50 |
- |
- |
- |
Good
bendability of weld, workability, High temperature oxidation resistance
Exhaust processing equipment of vehicle, Parts for boiler |
U430 |
SUS430 |
0.12
Max |
0.75
Max |
1.00
Max |
0.040
Max |
0.030
Max |
0.60
Max |
16.00`
18.00 |
- |
- |
- |
General-purpose
steel with excellent corrosion resistance Architectural interior,
Oil burner parts, Household appliance, Household electrical appliancedomestic
|
U430F |
SUS430F |
0.12
Max |
1.00
Max |
1.25
Max |
0.060
Max |
0.15
ȏ |
0.60
Max |
16.00`
18.00 |
0.60
Max |
- |
- |
Improving
machinability of 430 |
U434 |
SUS434 |
0.12
Max |
1.00
Max |
1.00
Max |
0.040
Max |
0.030
Max |
0.60
Max |
16.00`
18.00 |
0.75`
1.25 |
- |
- |
Improvement
steel of 430, Stronger than 430 in salinity
Usage for the car exterior |
U447J1 |
SUS447J1 |
0.010
Max |
0.40
Max |
0.40
Max |
0.030
Max |
0.020
Max |
|
28.50`
32.00 |
1.50`
2.50 |
0.015
Max |
- |
Improved
corrosion resistance through high Cr-Mo and extremely low C and
N. Good for plants that handle such organic acids as acetic acid
and lactic acid and for caustic soda plants. Resistance to Stress
Corrosion Cracking caused by halogen ions. Use for pitting corrosion
resistance and pollution control equipment. |
UXM27 |
SUSXM27 |
0.010
Max |
0.40
Max |
0.40
Max |
0.030
Max |
0.020
Max |
|
25.00`
27.50 |
0.75`
1.50 |
0.015
Max |
- |
Usage
in which both character to which 447J1 is similar and usage, corrosion
resistance, and soft magnetic are needed. |
- From Cu 0.20%
or less to Ni+Cu 0.50% or less from Ni 0.50% or less |